CERT Vendor-Initiated Bulletin VB-98.02 - apache
X-RDate: Wed, 21 Jan 1998 12:24:28 +0500 (ESK)
Date: Tue, 20 Jan 1998 15:50:08 -0500
From: CERT Bulletin <cert-advisory@cert.org>
To: cert-advisory@coal.cert.org
Subject: CERT Vendor-Initiated Bulletin VB-98.02 - apache
-----BEGIN PGP SIGNED MESSAGE-----
=============================================================================
CERT* Vendor-Initiated Bulletin VB-98.02
Jan. 20, 1998
Topic: Apache Security Advisory
Source: Marc Slemko, Apache Team Member <marc@apache.org>
To aid in the wide distribution of essential security information, the CERT
Coordination Center is forwarding the following information from Marc Slemko
of Apache. Apache urges you to act on this information as soon as
possible. Apache contact information is included in the forwarded text
below; please contact them if you have any questions or need further
information.
=======================FORWARDED TEXT STARTS HERE============================
APACHE SECURITY ADVISORY
Release Date: Tuesday, January 6 1998
Topic: Possible security issues with Apache in some configurations
Summary of Issues
============================================================
This advisory is to inform all Apache users of several possible
security issues that have been discovered during an internal security
review of the Apache source code.
DO NOT BE ALARMED BY THIS ADVISORY. This is a pro-active step
designed to be certain that users of Apache are advised of the
issues and can take appropriate action to minimize their risk.
None of these holes allow for a root compromise (they only impact
the user Apache runs as, as set with the "User" directive; if you
have this user set to root, then fix your configuration now because
you probably have a gaping security hole) and they generally
require that a user already have access to the system before they
can exploit them, meaning that on a large number of systems they
are of little practical concern. Some of the issues that have been
addressed might not be exploitable in real-world conditions.
In some security environments, however, they may be of more concern.
The administrator of the system running Apache is the only one who
can make the judgment call as to how significant the below issues
are in their environment.
Resolution of Problems
======================
We very strongly recommend that anyone using versions of Apache
previous to 1.2 or earlier 1.2 versions upgrade to the newly released
1.2.5. It is now available at
http://www.apache.org/dist/
There are no plans for an immediate 1.3b4 release to correct these
problems in the 1.3 beta development tree, however we will make
patches for 1.3b3 to correct these issues available at
http://www.apache.org/dist/patches/apply_to_1.3b3/
in the near future.
Technical Description of Issues
===============================
Below is a step by step technical description of the potential
problems discovered. Read the below only if you wish to understand
the details of the problems to better judge how they impact your
server and if you have a solid grounding in how Apache works. If
in doubt, you are advised to simply upgrade to 1.2.5 as soon as
practical.
I. Buffer overflow in cfg_getline()
RISK: medium
cfg_getline() is a function that the Apache core and several
Apache modules use to read certain types of files from disk.
Some examples of the type of files that read with this are
htaccess, htpasswd and mod_imap files.
It is possible to create a sequence of data such that a
buffer overflow occurs while cfg_getline is reading from
a file. If someone has access to create any of these types
of files on the server, this hole is generally exploitable
to gain full access to the user Apache runs as.
On most systems, this is of little consequence since users
already have such access via methods such as the creation of
their own CGI scripts. If, however, the server is secured
so that the user has no access to the server other than to
create and modify files (eg. a "ftp only" account with no
ability to create CGI scripts) this could allow increased
access to the server.
II. Several coding errors in mod_include
RISK: medium
There are several coding problems in mod_include which can
result in a buffer overflow or in the child process going
into an infinite loop.
The same comments about the nature of the risk apply here as
do for the cfg_getline() overflow. Generally, a user already
needs to have access to the server to exploit this. Note that
it is possible to setup a document which deliberately allows this
to be remotely exploited, however such a document would be very
rare in practice.
If you do not allow users to use mod_include, then they
can not exploit these holes.
III. Inefficient removal of duplicate '/'s ("beck" exploit)
RISK: medium
The code in the no2slash() function used to collapse multiple
'/'s in a request for access checking purposes is very
inefficient. It is O(n^2) in the number of '/'s in the
input. What this means is that as the input size grows,
it very quickly requires vastly increased CPU time to
process the request. By sending many requests with a large
number of '/'s in to a server, it is possible to cause a
large amount of CPU time to be used in processing these
requests. Making multiple simultaneous requests of this
nature could result in a high load average, high CPU usage,
and possibly starving other processes for CPU resulting in
a denial of service attack. This does not allow for any
compromise of the server.
The fixed version of the no2slash() function is O(n) and
does not allow for this attack.
Thanks to Michal Zalewski <lcamtuf@boss.staszic.waw.pl> for
discovering this bug and reporting it on the BUGTRAQ
mailing list along with the "beck" script that can be
used to exploit it.
IV. Possible buffer overflow in "logresolve" program.
RISK: low
The logresolve program is used for non-realtime processing of
logfiles to convert numeric IP addresses into host names.
In some cases, it may be possible for a remote user who has
control of a DNS server to return a hostname specifically
designed to exploit a coding hole in logresolve.
This can only happen on a system where either the MAXDNAME
define does not exist and the resolver can return names
longer than 256 characters or where the MAXDNAME define
does exist but is less than the maximum length of hostname
that the resolver can return. Even on such (arguably
broken) systems, this would be very difficult to exploit.
The number of systems which are impacted by this is very
small.
This problem is a potential concern only if you use the
logresolve program.
V. Insufficient data validation in mod_proxy
RISK: low
The ftp proxy part of mod_proxy accepts directory listings from
remote ftp servers and converts them to HTML to send to the
client. It is possible to deliberately create a listing that
will cause Apache to dump core.
This hole does not compromise the server; the only risk
is that it would be possible to use this to create a
denial of service attack which would render the server
effectively inoperative.
If you do not use mod_proxy, you are not vulnerable to this.
If you restrict the use of mod_proxy, then only those users
who are permitted to use it can attempt to exploit this
problem.
VI. Possible buffer overflow reading from the proxy cache
RISK: low
When caching is enabled in mod_proxy, Apache writes cached
files to disk as the user that the server runs as. If an
attacker can gain access to this user id (eg. by running
a CGI script from a pre-existing account on the machine)
then they can modify the filenames on disk resulting in a
buffer overflow.
Because the data is limited to what can be stored in a
filename (not the file, just the filename), and they already
need to have access to the user ID the server runs as to
exploit this, the risk is minimal.
The main instance where this may be a cause for concern is if
there is privileged information stored in memory by the
web server, such as an unencrypted SSL key. This same
caution, however, applies to the other buffer overflows
listed.
If you do not use mod_proxy, this problem can not be
exploited.
VII. Unreadable htaccess files were ignored
RISK: low
Previously, if a htaccess file was unreadable Apache ignored
it. This is, from a security standpoint, a poor idea
because it goes against the principle of "if in doubt, deny
access". This had already been corrected in the 1.3
development tree, but we had refrained from making the
change in 1.2 because it could cause unexpected behavior
on existing sites. We have since reconsidered, and as of
1.2.5, Apache will now reject requests if there is a htaccess
file present in the relevant directory tree that is unreadable
for any reason.
It is also possible, in very rare conditions, for this to
to be used to bypass htaccess files restricting access to
a directory or file. The only case where this can happen
is if the attacker can form a request that results in the
full path to the htaccess file being too long (on most
systems, meaning over 1024 characters) yet the request for
the protected file in the same directory is not too long.
The only normal case where such an attack could be possible
is if there is a symbolic link such as "somedir -> ."
created in the document tree.
Contact Information
===================
Full information about Apache and the 1.2.5 release which fixes
these issues is available at http://www.apache.org/
Normal bugs can be reported via http://www.apache.org/bug_report.html
If you believe you have discovered a security hole in Apache, please
be sure to contact us at security@apache.org so that we can verify
and resolve the problem. Support questions to this address will
not get a response. We fully support the concept of full disclosure,
however it is always preferable to try to work with the vendor
first before publicizing information about security holes.
- --
Marc Slemko | Apache team member
marcs@znep.com | marc@apache.org
========================FORWARDED TEXT ENDS HERE=============================
If you believe that your system has been compromised, contact the CERT
Coordination Center or your representative in the Forum of Incident Response
and Security Teams (FIRST). See http://www.first.org/team-info/.
We strongly urge you to encrypt any sensitive information you send by email.
The CERT Coordination Center can support a shared DES key and PGP. Contact
the CERT staff for more information.
Location of CERT PGP key
ftp://ftp.cert.org/pub/CERT_PGP.key
CERT Contact Information
- ------------------------
Email cert@cert.org
Phone +1 412-268-7090 (24-hour hotline)
CERT personnel answer 8:30-5:00 p.m. EST
(GMT-5)/EDT(GMT-4), and are on call for
emergencies during other hours.
Fax +1 412-268-6989
Postal address
CERT Coordination Center
Software Engineering Institute
Carnegie Mellon University
Pittsburgh PA 15213-3890
USA
CERT publications, information about FIRST representatives, and other
security-related information are available from
http://www.cert.org/
ftp://ftp.cert.org/pub/
CERT advisories and bulletins are also posted on the USENET newsgroup
comp.security.announce
To be added to our mailing list for CERT advisories and bulletins, send your
email address to
cert-advisory-request@cert.org
In the subject line, type
SUBSCRIBE your-email-address
* Registered U.S. Patent and Trademark Office.
The CERT Coordination Center is part of the Software Engineering
Institute (SEI). The SEI is sponsored by the U. S. Department of Defense.
This file: ftp://ftp.cert.org/pub/cert_bulletins/VB-98.02.apache
-----BEGIN PGP SIGNATURE-----
Version: 2.6.2
iQCVAwUBNMT12nVP+x0t4w7BAQGHJAP/SdyVud0/zd32blZz6C6Dn+Q4KEmkuo+p
h9lkJGqRj+dLMDS7fXEG3U2yfst8oTleoQ6crsapk0wRalCeKDJpUSL7V5rOgPQB
YneEv9AAgnAbXWOg+BsfgGS2MQ1nOMECX4y6nNM79oYLs9woxNbnq5kvo44bjuhz
8wGb54+vWUY=
=kByn
-----END PGP SIGNATURE-----
